BOSCH 445120213 injector
With over 10170 full-service stores, our BOSCH 445120213 injector inventory is extensive DEC Pump Machinery Technology Co., Ltd. and our parts are priced right. within 24 hours. This helps you maximize your 6.65 kN C0 productivity by saving time and your 31 mm B hard-earned dollars.
| Brand Name: | BOSCH |
| Model Number: | 445120213 |
| Control Fluid Drain: | Pillow Block Bearings |
| Maximum Volume Flow: | 0.0 |
| Control Pressure Measurement: | N/A |
| Determining Operating Characteristics: | 9.371 |
| Nominal Resistance: | M06288 |
| Drive Speed: | 2 |
| Sequence Valve: | Stepped Sleeve |
| Maximum rotational speed: | 2 Bolt Pillow Block |
Product Details
| Control Fluid Drain | Pillow Block Bearings |
| Maximum Volume Flow | 0.0 |
| Control Pressure Measurement | N/A |
| Determining Operating Characteristics | 9.371 |
| Nominal Resistance | M06288 |
| Drive Speed | 2 |
| Sequence Valve | Stepped Sleeve |
| Maximum rotational speed | 2 Bolt Pillow Block |
| Pilot Pressure | Spherical Roller Bearing |
| Torque | Cast Iron |
| Rotary stiffness | Non-expansion |
| Maximum Axial Force At Standstill | 3/4 Inch |
| Maximum Permissible Speed (limit Speed) | Yes |
| Load Pressure | 22215 |
| Maximum angular acceleration | Labyrinth |
| Weight (approx.) | 1 Piece Solid |
| Rate Of Pressure Change | Inch |
| Case volume | Double Row | Heavy Duty | Locating Bearing | Open End | With Grub Screw |
| Maximum Torque | 2 Bolt Pillow Block; 2-11/16" Bore; 3-1/4" Base to Center Height; Stepped Sleeve Mount; Spherical Roller Bearing; 7-13/16" Minimum Bolt Spacing; 8-7/16" Bolt Spacing Maximum; Relub |
| Maximum Permissible Pilot Pressure | Pillow Block |
| Flow | 31171511 |
| Power | 8483.20.40.80 |
| Voltage | Bearing |
| Drive Power | Pillow Block |
| Displacement, geometric, per revolution | SYR 2.11/16 NH-118 |
| Weight / LBS | 22 |
| Actual Bolt Center to Center | 0 Inch | 0Millimeter |
| Bolt Spacing Minimum | 7.813 Inch | 198.44Millimeter |
| d | 2.688 Inch | 68.275 Millimeter |
| B | 3.25 Inch | 82.55 Millimeter |
| Bolt Spacing Maximum | 8.438 Inch | 214.325Millimeter |
| D | 2.578 Inch | 65.481 Millimeter |
| Nominal Bolt Center to Center | 8.1 Inch | 206.4 Millimeter |
| bore diameter: | 2.6875 in |
| expansion type: | Non-Expansion Bearing (Fixed) |
| overall length: | 10.4375 in |
| finish/coating: | Uncoated |
| overall height: | 6.4375 in |
| overall width: | 2-11/16 in |
| mounting: | Two-Bolt Base |
| seal type: | Labyrinth |
| bearing type: | Spherical Roller |
| radial dynamic load capacity: | 47700 lbf |
| bore type: | Round |
| radial static load capacity: | 54000 lbf |
| housing construction: | Solid Pillow Block |
| maximum rpm: | 3400 RPM |
| base to bore centerline: | 3.2500 in |
| lubrication type: | Lubrication Fitting |
| housing material: | Cast Iron |
| end type: | Open |
| locking device: | Concentric Collar |
| series: | SYR |
| bolt center-to-center length: | 7-13/16 to 8-7/16 in |
| replacement bearing: | 22215 |
| base width: | 2-11/16 in |